TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1080 of 1434
TM 9-2320-366-34-2 13-47. V-ROD CONTROL ARM REPLACEMENT (CONT) (12) Position bracket (7) on V-rod control arm (3) with two U- bolts (8), four spacers (9), washers (10) and nuts (11). (13) Tighten four nuts (11) to 14-18 lb-ft (20-24 N·m). c. Rear Removal. CAUTION Do not remove more than one V-rod control arm at a time. Failure to comply may result in damage to equipment. NOTE Note position of U-bolts and brackets prior to removal. (1) Remove four nuts (1), washers (2), spacers (3), two U- bolts (4) and bracket (5) from V-rod control arm. (2) Position bracket (5) to allow access. 13-420 Change 1