TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1078 of 1434
TM 9-2320-366-34-2 13-47. V-ROD CONTROL ARM REPLACEMENT (CONT) (8) Match mark V-rod control arm (6) and support (8). (9) Position V-rod control arm (6) in vise. (10) Remove self-locking nut (11) and support (8) from V-rod control arm (6). Discard self-locking nut. (11) Remove two bolts (9) from support (8). b. Installation. (1) Position two bolts (1) in support (2). (2) With matchmarks aligned, position support (2) on V-rod control arm (3) with self-locking nut (4). (3) Tighten self-locking nut (4) to 590-736 lb-ft (800-1000 N·m). (4) Remove V-rod control arm (3) from vise. 13-418 Change 1