TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1071 of 1434
TM 9-2320-366-34-2 k. Sliding Mechanism Disassembly. (1) Remove nut (1), washer (2), screw (3), and lever (4) from lever (5). (2) Remove bushing (6) from lever (4). (3) Remove nut (7), screw (8), and lever (9) from lever (5). (4) Remove bushing (10) from lever (9). (5) Remove screw (11), bushing (12), and lever (5) from sliding mechanism (13). WARNING Use care when removing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. NOTE • Left and right side plungers are removed the same way. Left side shown. • Springs must be compressed to access pivot pins. (6) Remove pivot pin (14) and lever (4) from plunger (15). Change 1 13-411