TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1069 of 1434
TM 9-2320-366-34-2 (6) Inspect two shoes (4) for distortion, wear, and cracking. NOTE Replace two shoes if base measurement exceeds minimum thickness. (7) Measure two shoes (4), minimum wear 0.03 in. (0.002 cm). (8) Inspect two cushions (5 and 6) for distortion, wear, and cracking. (9) Inspect two washers (7 and 8) for distortion, wear, and cracking. (10) Inspect two springs (9) for distortion, wear, and cracking. (11) Inspect tie rod (10) for distortion, wear, and cracking. (12) Position two shoes (4) in compensator (1). NOTE Replace adjusting plate or add shim(s) if gap exceeds maximum clearance. (13) Measure gap (A) between two shoes (4) and adjusting plates (2), maximum clearance 0.06 in. (0.001 cm). (14) Remove two shoes (4) from compensator (1). 13-409