TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1065 of 1434
TM 9-2320-366-34-2 CAUTION Ensure hole in stud is lined up correctly with yoke hole. Failure to comply will result in damage to equipment. (6) Install stud (9) in fifth wheel top plate (2). (7) Install manual control handle (10) in fifth wheel top plate (2) with washer (11), spring (12), washer (13), and cotter pin (14). (8) Install control cam (15) on manual control handle (10). WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (9) Apply sealing compound to threads of screw (16). (10) Install washer (17), bearing (18), washer (19), and screw (16) in control cam (15). (11) Install roller (20), two washers (21), and screw (22) in control cam (15) with self-locking nut (23). 13-405