TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 1050 of 1434

TM 9-2320-366-34-2 13-44. FRAME MUFFLER SUPPORT BRACKET REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Muffler and heatshield removed (TM 9-2320-366- 20-3). 15K Self-Recovery Winch (SRW) removed, if equipped (para 16-88). M1093/M1094 Angle bracket removed (RH side) (para 13-10). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Tools and Special Tools (Cont) Socket Set, Socket Wrench (Item 59, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Nut, Self-locking (1) (Item 202, Appendix F) Nut, Self-locking (2) (Item 203, Appendix F) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE Front and rear frame muffler support brackets are removed the same way. Front frame muffler support bracket shown. (1) Remove self-locking nut (1), screw (2), and clamp (3) from frame muffler support bracket (4). Discard self- locking nut. (2) Remove two self-locking nuts (5), screws (6), and frame muffler support bracket (4) from frame rail (7). Discard self-locking nuts. 13-390