TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 105 of 1434
TM 9-2320-366-34-2 NOTE Perform step (50.1) on vehicles equipped with transmission oil cooler hoses. (50.1) Position gasket (60), flywheel cover (58), and transmission oil cooler hose bracket (60.1) on flywheel housing (13.3) with four washers (57) and screws (56). (50.2) Tighten four screws (56) to 16-25 lb-ft (21-35 N·m). (50.3) Turn engine speed sensor (13.2) to the right in flywheel housing (13.3) until engine speed sensor contacts flywheel. (50.4) Turn engine speed sensor (13.2) to the left out of flywheel housing (13.3) two full turns. (50.5) Tighten jam nut (13.1) on engine speed sensor (13.2). Change 1 3-42.1/(3-42.2 Blank)