TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1048 of 1434
TM 9-2320-366-34-2 13-43. INTERMEDIATE CROSSMEMBER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions One frame rail removed (para 13-24 through 13-32). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Socket Set, Impact (Item 58, Appendix B) Tools and Special Tools (Cont) Wrench Set, Socket (Item 84, Appendix B) Sling, Cargo (2) (Item 56, Appendix B) Materials/Parts Bolt (4) (Item 17, Appendix F) Nut, Self-locking (4) (Item 211, Appendix F) Personnel Required (2) a. Removal. WARNING Intermediate crossmember weighs app- roximately 75 lbs (34 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Step (1) requires the aid of an assistant. • All models have two intermediate crossmembers except models M1085 and M1086. M1085 and M1086 have three intermediate crossmembers. Remove four collars (1), bolts (2), and intermediate crossmember (3) from frame rail (4). Discard collars and bolts. 13-388