TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1046 of 1434
TM 9-2320-366-34-2 13-42. FRONT CROSSMEMBER REPLACEMENT (CONT) WARNING Front crossmember weighs approximately 200 lbs (91 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (4) through (12) require the aid of an assistant. (4) Position front crossmember (5) on vehicle. NOTE Left and right side of front crossmember is installed the same way. Left side shown. (5) Position four bolts (6) and self-locking nuts (7) in front crossmember (5). (6) Tighten four self-locking nuts (7) to 210-225 lb-ft (285- 305 N·m). (7) Perform steps (5) and (6) on right side of front crossmember. NOTE Perform step (8) and (9) on right side of front crossmember. (8) Position bracket (8) on front crossmember (5) with two bolts (9) and self-locking nuts (10). (9) Tighten two self-locking nuts (10) to 210-225 lb-ft (285- 305 N·m). 13-386