TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1043 of 1434
TM 9-2320-366-34-2 13-42. FRONT CROSSMEMBER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Front bumper and gravel deflector removed (TM 9- 2320-366-20-4). Headlight and headlight housing removed (TM 9- 2320-366-20-3). Radiator brackets removed (para 13-45). Front spring brackets removed (front) (para 14-6). Check valve removed (TM 9-2320-366-20-4). Front axle quick release valve removed (TM 9-2320- 366-20-4). Front gladhands removed (TM 9-2320-366-20-4). Cab to chassis ground strap removed (TM 9-2320- 366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Socket Set, Impact (Item 58, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Sling, Cargo (2) (Item 56, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Materials/Parts Bolt (2) (Item 19, Appendix F) Bolt (8) (Item 18, Appendix F) Nut, Self-locking (12) (Item 211, Appendix F) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE • Steps (1) through (5) require the aid of an assistant. • Perform step (1) on left side of front crossmember. (1) Remove two collars (1), bolts (2), and bracket (3) from front crossmember (4). Discard collars and bolts. 13-383