TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1042 of 1434
TM 9-2320-366-34-2 13-41. M1088 RAMP REPLACEMENT (CONT) b. Installation. CAUTION Ensure ramp is in full contact with frame rail prior to installation. Failure to comply may result in damage to equipment. NOTE • Steps (1) through (3) require the aid of an assistant. • Left and right side ramps are installed the same way. Left side shown. (1) Position ramp (1) and rear shock absorber bracket (2) on frame rail (3) with two bolts (4) and self-locking nuts (5). (2) Position front shock absorber bracket (6) on ramp (1) with two bolts (7) and self-locking nuts (8). (3) Tighten two self-locking nuts (5 and 8) to 210-225 lb-ft (285-305 N·m). c. Follow-On Maintenance. Install rear shock absorbers (TM 9-2320-366-20-4). End of Task. 13-382