TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1041 of 1434
TM 9-2320-366-34-2 13-41. M1088 RAMP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Rear shock absorbers removed (TM 9-2320- 366-20-4). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Socket Set, Impact (Item 58, Appendix B) Tools and Special Tools (Cont) Wrench, Impact, Electric (Item 88, Appendix B) Materials/Parts Nut, Self-locking (4) (Item 211, Appendix F) Bolt (2) (Item 9, Appendix F) Bolt (2) (Item 10, Appendix F) Personnel (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply may result in seizing of collar to bolt. NOTE • Left and right side ramps are removed the same way. Left side shown. • Steps (1) and (2) require the aid of an assistant. (1) Remove two collars (1), bolts (2), and front shock absorber bracket (3) from frame rail (4). Discard collars and bolts. (2) Remove two collars (5), bolts (6), rear shock absorber bracket (7), and ramp (8) from frame rail (4). Discard collars and bolts. 13-381