TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1038 of 1434
TM 9-2320-366-34-2 13-40. M1089 SUBFRAME RAIL REPLACEMENT (CONT) b. Installation. WARNING Subframe rail weighs approximately 240 lbs (109 kgs). Attach a suitable lifting device prior to install. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Left and right side subframe rails are installed the same way. Right side shown. • Step (1) requires the aid of two assistants. (1) Position subframe rail (1) on vehicle. CAUTION Ensure subframe rail flange is fully in contact with main frame rail flange. Failure to comply may result in damage to equipment. NOTE Steps (2) through (13) requires the aid of an assistant. (2) Position 21 bolts (2) and self-locking nuts (3) in frame plate (4). (3) Tighten 21 self-locking nuts (3) to 210-225 lb-ft (285-305 N·m). 13-378