TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download

Page 1030 of 1434

TM 9-2320-366-34-2 13-370 Change 2 13-39. M1086 SUBFRAME RAIL REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Material Handling Crane (MHC) removed (para 16-2). Cargo bed removed (para 15-9). Transmission auxiliary oil cooler removed (TM 9- 2320-366-20-4). Fuel tank removed (TM 9-2320-366-20-3). Hydraulic manifold removed (TM 9-2320-366-20-5). Tool box removed (TM 9-2320-366-20-4). Hydraulic reservoir removed (TM 9-2320-366-20-5). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Socket Set, Impact (Item 58, Appendix B) Materials/Parts Nut, Self-locking (29) (Item 211, Appendix F) Bolt (29) (Item 7, Appendix F) Personnel (3) a. Removal. (1) Remove two collars (1) and bolts (2) from front lifting bracket (3). Discard collars and bolts. WARNING CAUTION Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. When removing bolts, continuous removal of collars is mandatory. Failure to comply may result in seizing of collar to bolt. NOTE Left and right side subframe rails are removed the same way. Right side shown. Steps (1) through (4) require the aid of an assistant.