TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1022 of 1434
TM 9-2320-366-34-2 13-37. M1085 SUBFRAME RAIL REPLACEMENT (CONT) b. Installation. WARNING Subframe rail weighs approximately 280 lbs (127 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Left and right side subframe rails are installed the same way. Right side shown. • Step (1) requires the aid of two assistants. (1) Position subframe rail (1) on vehicle. CAUTION Ensure subframe rail flange is fully in contact with main frame rail flange. Failure to comply may result in damage to equipment. NOTE Steps (2) through (11) requires the aid of an assistant. (2) Position three bolts (2) and self-locking nuts (3) in bracket (4). (3) Tighten three self-locking nuts (3) to 210-225 lb-ft (285- 305 N·m). 13-362