TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 102 of 1434
TM 9-2320-366-34-2 3-3. ENGINE ASSEMBLY REPLACEMENT (CONT) WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (33) Apply sealing compound to threads of four bolts (47). (34) Position four bolts (47) in left rear mounting bracket (48). NOTE Left and right side front engine mounts are installed the same way. Right side shown. (35) Position self-locking nut (49) on bolt (43). (36) Tighten self-locking nut (49) to 76-94 lb-ft (103-127 N·m). (37) Tighten two self-locking nuts (40) to 22-26 lb-ft (30-35 N·m). (38) Perform steps (35) through (37) on left side of engine. 3-40