TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1015 of 1434
TM 9-2320-366-34-2 CAUTION Ensure subframe rail flange is fully in contact with main frame rail flange. Failure to comply may result in damage to equipment. NOTE • Left and right side of subframe are installed the same way. Right side shown. • Steps (2) through (16) require the aid of an assistant. (2) Position six bolts (2), lockwashers (3) and nuts (4) in bracket (5). (3) Tighten six nuts (4) to 210-225 lb-ft (285-305 N·m). (4) Position bracket (6) on frame plate (7) with two bolts (8), washers (9), and nuts (10). (5) Tighten two nuts (10) to 77-92 lb-ft (105-125 N·m). (6) Position eight bolts (11) and self-locking nuts (12) in frame plate (8). (7) Tighten eight self-locking nuts (12) to 210-225 lb-ft (285- 305 N·m). (8) Position three bolts (13) and self-locking nuts (14) in bracket (15). (9) Tighten three self-locking nuts (14) to 210-225 lb-ft (285- 305 N·m). 13-355