TM-9-2320-366-34-2 MTV Direct Maintenance Manual M1083 Series - Volume 2 Download
Page 1010 of 1434
TM 9-2320-366-34-2 13-350 Change 2 13-36. M1094 SUBFRAME REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Dump body removed (para 15-10). Rear fender mounting brackets removed (para 13-9). Transmission auxiliary oil cooler removed (TM 9-2320-366-20-4). Dump body hoist cylinder removed (para 17-4). Four way relief valve removed (para 17-3). Suspension brackets removed (para 13-13). 15K Self-Recovery Winch (SRW) control valve removed, if equipped (TM 9-2320-366-20-5). Hydraulic reservoir removed (TM 9-2320-366-20-5). Dump body switch removed (TM 9-2320-366-20-3). Dump cable assembly removed (TM 9-2320-366-20-3). 15K Self-Recovery Winch (SRW) valve control cable assembly removed, if equipped (TM 9-2320-366-20-5). Tool box removed (TM 9-2320-366-20-4). Hydraulic manifold removed (TM 9-2320-366-20-4). Fuel tank removed (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Socket Set, Impact (Item 58, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Nut, Self-Locking (Item 202, Appendix F) Nut, Self-Locking (38) (Item 211, Appendix F) Bolt (16) (Item 15, Appendix F) Lockwasher (12) (Item 142, Appendix F) Personnel (4) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel.