TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 997 of 1591
TM 9-2320-366-34-1 2-850 Change 1 INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 97, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P WARNING CAUTION Read WARNING and CAUTION on following page. KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION Replace transmission external wiring harness (para 6-7). YES 1. NO START Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty J solenoid. Faulty WTEC III transmission ECU. POSSIBLE PROBLEMS Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. Is continuity present from connector P119-J to connector P67-e? If continuity is not present, transmission external wiring harness is faulty. c71. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 42, 44, AND/OR 45 SUB CODE 24 (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION ADAPTER CABLE ASSEMBLY)