TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 890 of 1591
TM 9-2320-366-34-1 Change 1 2-745 RESISTANCE TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to pin A of D solenoid connector. (3) Connect negative (-) probe of multimeter to pin B of D solenoid connector and note reading on multimeter. (4) If resistance is less than 2.5 ohms or greater than 5.0 ohms, replace D solenoid (para 7-7). (5) If resistance is between 2.5-5.0 ohms, replace WTEC III transmission ECU (TM 9-2320-366-20-4). (6) Connect transmission internal wiring harness connector D to D solenoid connector. (7) Install cover on control valve module with four screws. (8) Install control valve module (para 7-10). (9) Connect batteries (TM 9-2320-366-20-3).