TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 769 of 1591
INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench Set, Scoket (Item 85, Appendix B) Pan, Drain (Item 43, Appendix B) References TM 9-4910-571-12&P Personnel Required (2) TM 9-2320-366-34-1 2-624 Change 1 KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION WARNING CAUTION Read WARNING and CAUTION on following page. START 1. Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty scavenge pump assembly. Faulty WTEC III transmission ECU. POSSIBLE PROBLEMS Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. Is continuity present from connector P119-a to connector P67-N? If continuity is not present, transmission external wiring harness is faulty. YES NO Replace transmission external wiring harness (para 6-7). c51. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 24 SUB CODE 12 OR 23 (SERIAL NUMBER 6510032369 AND HIGHER)