TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 737 of 1591
TM 9-2320-366-34-1 2-592 Change 1 Materials/Parts Wire, Elect, 50 ft (Item 97, Appendix C) References TM 9-4910-571-12&P Personnel Required (2) 1. WARNING CAUTION Read WARNING and CAUTION on following page. KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION Replace transmission external wiring harness (para 6-7). YES NO START POSSIBLE PROBLEMS Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty transmission turbine speed sensor. Faulty WTEC III transmission ECU. Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. Is continuity present from connector P119-p to connector P67-V? If continuity is not present, transmission external wiring harness is faulty. INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench Set, Socket (Item 85, Appendix B) c48. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 22 SUB CODE 15 (SERIAL NUMBER 6510032369 AND HIGHER)