TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 708 of 1591
Change 1 2-567 TM 9-2320-366-34-1 Sub Code Shift From - To 01 1-2 2-N-2 4-3 4-5 6-5 6-7 R-1 R-2 R-N-1 R-2 N3-N2 99 79 78 72 71 56 34 54 32 08 Table 2-5. C3 Pressure Switch PRESSURE TEST (1) Remove front and intermediate propeller shafts (TM 9-2320-366-20-4). (2) Place drain pan under pressure tap. (3) Remove C3 pressure tap plug. (4) Connect boss to tube adapter, hose, and pipe to tube adapter to C3 pressure tap. (5) Connect batteries (TM 9-2320-366-20-3). (6) Perform STE/ICE-R test #50 (TM 9-4910- 571-12&P). (7) Start engine (TM 9-2320-366-10-1). (8) With parking brake applied, make shift indicated by sub code, refer to Table 2-4.1. C3 Pressure Switch, and note reading on STE/ICE-R. (9) If STE/ICE-R indicates greater than 0 psi (0 kPa), replace C3 solenoid regulator valve (para 7-7). (10) If STE/ICE-R indicates 0 psi (0 kPa), replace C3 pressure switch (para 7-8). (11) Shut down engine (TM 9-2320-366-10-1). (12) Remove pipe to tube adapter, hose, and tube to boss adapter from C3 clutch pressure tap. (13) Install C3 pressure tap plug and remove drain pan. (14) Install front and intermediate propeller shafts (TM 9-2320-366-20-4).