TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 699 of 1591
TM 9-2320-366-34-1 2-558 Change 1 1. WARNING CAUTION Read WARNING and CAUTION on following page. START TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION KNOWN INFO POSSIBLE PROBLEMS Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. WTEC II TEPSS OK. Is continuity present from connector P119-h to external wiring harness 31-pin connector pin W? If continuity is not present, transmission external wiring harness is faulty. Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty C3 solenoid regulator valve. Faulty C3 pressure switch. Materials/Parts Wire, Elect, 50 ft (Item 97, Appendix C) Adapter, Straight, Pipe to Tube (Item 2.1, Appendix C) Adapter, Straight, Tube to Boss (Item 2.2, Appendix C) Hose Assembly, Nonmetallic (Item 40.2, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P NO Replace transmission external wiring harness (para 6-7). YES c45. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 52 AND ANY SUB CODE (SERIAL NUMBER 6510032369 AND HIGHER) INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench Set, Socket (Item 85, Appendix B)