TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 672 of 1591
Change 1 2-531 TM 9-2320-366-34-1 (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to internal wiring harness 31-pin connector connector pin f. (3) Connect negative (-) probe of multimeter to internal wiring harness connector N pin B and note reading on multimeter. (4) If continuity is not present, replace transmission internal wiring harness (para 7-13). (5) Connect positive (+) probe of multimeter to internal wiring harness 31-pin connector pin f. (6) Connect negative (-) probe of multimeter to all other pins in internal wiring harness 31-pin connector and note reading on multimeter. (7) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (8) If continuity is present, transmission internal wiring harness is shorted; replace transmission internal wiring harness (para 7-13). CONTINUITY TEST