TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 67 of 1591
TM 9-2320-366-34-1 OVERVIEW (CONT) DIRECT SUPPORT MAINTENANCE (CONT) • CHAPTER 12, STEERING SYSTEM MAINTENANCE • CHAPTER 13, FRAME MAINTENANCE • CHAPTER 14, SUSPENSION MAINTENANCE • APPENDIX A, REFERENCES. Lists publications used with the MTV and reference publications which contain information regarding the equipment. • APPENDIX B, TOOLS AND SPECIAL TOOLS LIST. Lists equipment used in the performance of maintenance. • APPENDIX C, EXPENDABLE/DURABLE SUPPLIES AND MATERIALS LIST. Lists expendable and durable items used in the performance of maintenance. • APPENDIX D, ILLUSTRATED LIST OF MANUFACTURED ITEMS. Illustrates and describes items that must be fabricated from bulk materials for repair of the MTV. • APPENDIX E, TORQUE LIMITS. Lists the standard torque values for specific attaching hardware. • APPENDIX F, MANDATORY REPLACEMENT PARTS. • APPENDIX G, ADDITIONAL AUTHORIZATION LIST (AAL). Lists additional items you are authorized for support of the MTV. • APPENDIX H, TRANSMISSION/TRANSMISSION CONTROLS ADAPTABILITY CHART. Lists actions required to mate different transmission configurations with WTEC II or WTEC III controls. • SUBJECT INDEX. Lists important subjects contained in Volume 2 in alphabetical order and gives the paragraph number where they are located. Volume 3 contains the following major sections in order of appearance: • WARNING SUMMARY. Provides a summary of the most important warnings that apply throughout the manual. Read all WARNINGS and CAUTIONS before performing any maintenance procedure. • TABLE OF CONTENTS. Lists the chapters, sections, appendixes, and indexes with page numbers in order of appearance. • MAINTENANCE PROCEDURES. DS Maintenance procedures to assist you in supporting the MTV. Chapters 15 through 17 are Direct Support Maintenance procedures. Become familiar with the entire maintenance procedure before beginning any maintenance task. DIRECT SUPPORT MAINTENANCE • CHAPTER 15, BODY AND CAB MAINTENANCE • CHAPTER 16, MATERIAL HANDLING CRANES (MHC), 30K WINCHES, UNDERLIFT, AND 15K SELF-RECOVERY WINCH (SRW) MAINTENANCE x Change 1