TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 383 of 1591
TM 9-2320-366-34-1 2-244 Change 1 INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 97, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P START 1. WARNING CAUTION Read WARNING and CAUTION on following page. KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION POSSIBLE PROBLEMS Replace transmission external wiring harness (para 6-7). YES NO Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty C solenoid. Faulty WTEC II TEPSS. Is continuity present from connector P119-C to external wiring harness 31-pin connector pin B? If continuity is not present, transmission external wiring harness is faulty. Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. c17. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 41, 42, 44, AND/OR 45 SUB CODE 14 (SERIAL NUMBER 6510032369 AND HIGHER)