TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 307 of 1591
TM 9-2320-366-34-1 INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 97, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P WARNING CAUTION Read WARNING and CAUTION on following page. START KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION Replace transmission external wiring harness (para 6-7). YES 1. NO Is continuity present from connector P119-h to external wiring harness 24-pin connector pin F2? If continuity is not present, transmission external wiring harness is faulty. POSSIBLE PROBLEMS Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty C3 pressure switch. Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. WTEC II TEPSS OK. 2-170 Change 2 c10. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 32 AND/OR 57 AND ANY SUB CODE (PRIOR TO SERIAL NUMBER 6510032369)