TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download

Page 295 of 1591

TM 9-2320-366-34-1 WARNING CAUTION Read WARNING and CAUTION on following page. START KNOWN INFO Continuity Test or STE/ICE-R Test #91 TEST OPTIONS REASON FOR QUESTION YES Replace transmission external wiring harness (para 6-7). 1. NO POSSIBLE PROBLEMS Is continuity present from connector P119-h to external wiring harness 31-pin connector pin W? If continuity is not present, transmission external wiring harness is faulty. Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. WTEC II TEPSS OK. Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty C3 pressure switch. INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 97, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P 2-158 Change 2 c9. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 32 AND/OR 57 AND ANY SUB CODE (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION ADAPTER CABLE ASSEMBLY)