TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 276 of 1591
Change 1 2-139 TM 9-2320-366-34-1 RESISTANCE TEST (1) Remove control valve module (para 7-10). (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to internal wiring harness 24-pin connector pin G2. (4) Connect negative (-) probe of multimeter to internal wiring harness 24-pin connector pin F3 and note reading on multimeter. (5) If resistance is less than 300 ohms or greater than 2000 ohms, replace transmission internal wiring harness (para 7-13). (6) Install control valve module (para 7-10).