TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 251 of 1591
INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Pan, Drain (Item 43, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench Set, Socket (Item 75, Appendix B) TM 9-2320-366-34-1 KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION Replace transmission external wiring harness (para 6-7). WARNING CAUTION Read WARNING and CAUTION on following page. START YES 1. NO POSSIBLE PROBLEMS Is continuity present from connector P119-n to external wiring harness transfer case connector pin C? 2-114 Change 2 c4. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 22 SUB CODE 16 OR MAIN CODE 25 AND/OR 56 AND ANY SUB CODE Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. Faulty transmission external wiring harness. Faulty output speed sensor. Faulty transfer case wiring harness. Faulty WTEC II TEPSS. If continuity is not present, transmission external wiring harness is faulty.