TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 195 of 1591
1. TEST OPTIONS REASON FOR QUESTION NO TEST OPTIONS REASON FOR QUESTION YES KNOWN INFO 2. NO YES KNOWN INFO START Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). References TM 9-4910-571-12&P a.1.1. ENGINE CRANKS BUT DOES NOT START Does fuel linkage engage? This question eliminates possible problems and determines where troubleshooting continues. Go to step 4 of this fault. Are injectors properly timed? Visual inspection Inspection/adjustment Adjust fuel timing (para 4-5). POSSIBLE PROBLEMS If injectors are not properly timed, engine may not start. Electrical system OK. Fuel pressure OK. POSSIBLE PROBLEMS Faulty fuel injection timing. Faulty injector synchronization. Faulty engine assembly. Faulty fuel solenoid. Faulty fuel governor. Faulty fuel control linkage. Faulty fuel injection timing. Faulty injector synchronization. Faulty engine assembly. Electrical system OK. Fuel pressure OK. Fuel solenoid OK. Fuel governor OK. Fuel control linkage OK. TM 9-2320-366-34-1 2-66.12 Change 1