TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 149 of 1591
TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 2-32 2-32 2-32 2-32 2-32 1. NO YES START Vibration damper OK. Air cleaner OK. Engine oil level OK. Fuel system OK. Front end out of alignment OK. Loose or damaged engine mounts. Improper injector sychronization. NO YES Are all injectors set to the same reference point as No. 1 cylinder? Vibration damper OK. Air cleaner OK. Engine oil level OK. Fuel system OK. Engine mounts OK. Front end aligned. Improper injector synchronization. 2. Loose mounting hardware or damaged engine mounts will cause vibration. Fuel Injector Synchronization Engine will vibrate if injectors are not synchronized. KNOWN INFO POSSIBLE PROBLEMS WARNING Read WARNING on following page. TEST OPTIONS Visual inspection REASON FOR QUESTION KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION a5. TOO MUCH VIBRATION IN ENGINE Are engine front resilient mounts secure and free from damage? Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Tool Kit, Intl Comb Eng (TM 9-2320-366-20) Wrench, Torque, 0-60 N·m (Item96, Appendix B) Tighten loose mounting hardware. Replace engine front resilient mounts (para 3-4). Perform fuel injector synchronization (para 4-3). Replace engine assembly (para 3-3). INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1).