TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1434 of 1591
TM 9-2320-366-34-1 Change 2 H-3 (1) Installed Controls or Controls Being Installed (2) Installed Transmission or Transmission Being Installed (3) Required Modification (Refer to Section III) WTEC III (with ECU manufactured after October 1999) 3 TID 2 (transmission serial number 6510142172 to 6510262116) No modification required. WTEC III (with ECU manufactured after October 1999) 3 TID 3 (transmission serial number 6510262117 and subsequent) No modification required. Section III. MODIFICATION PARTS IDENTIFICATION Identification Part Number/NSN Description 31-pin connector 300130 5935-21-921-1813 Converts a transmission external wiring harness from a 24-pin ("D" type) connector to a 31-pin (round type) connector. Transmission internal wiring harness 29529474 6150-01-481-8088 Converts a TID 2 transmission to a TID 1 configuration to allow WTEC II controls to communicate with the transmission. Gasket 29503283 5330-01-360-9035 Required when replacing transmission internal wiring harness. ID harness 200100 6150-21-921-1191 Allows WTEC III controls to communicate with a PRE-ID transmission. Adapter cable assembly 29519210 6150-01-420-5987 Adapts a PRE-ID transmission with 24-pin ("D" type) connector to a transmission external wiring harness with a 31-pin (round) connector.