TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download

Page 140 of 1591

TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 2-23 2-23 2-23 2-23 2-23 FUEL INJECTOR TEST WARNING (1) Raise cab (TM 9-2320-366-10-1). (2) Remove valve cover (TM 9-2320-366-20-3). Use extreme care when opening cab door with cab raised. Failure to comply may result in injury to personnel or damage to equipment. (3) Open cab door. (4) Start engine (TM 9-2320-366-10-1). NOTE Actuating the control shaft lever places the injector in the Fuel On position for a few seconds. This causes excess fuel to be injected into that particular cylinder, causing a loud combustion knock. (5) Actuate No. 1 cylinder control shaft lever. (6) If actuating fuel injector does not result in a loud combustion knock, fuel injector is faulty. (7) Repeat step (5) for remaining injectors. (8) Shut down engine (TM 9-2320-366-10-1). (9) Close cab door. (10) Install valve cover (TM 9-2320-366-20-3). (11) Lower cab (TM 9-2320-366-10-1).