TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1352 of 1591
TM 9-2320-366-34-1 D-20. SPANNER WRENCH TOOL Make the spanner wrench tool from 0.38 in. (1 cm) steel stock and hardware according to the following instructions. Refer to the parts list and figure for details. Item Part Name/Number Material Description Size Qty 1 Spanner Handle Steel, 3/8 flat plate 6.64 in. (168.6 mm) x 11.98 in. (304.3 mm) x 0.38 in. (9.6 mm) 1 2 Spanner Jaw Steel, 3/8 flat plate 3.05 in. (77.5 mm) x 9.08 in. (230.6 mm) x 0.38 in. (9.6 mm) 1 3 Spanner Pin Steel, Rod 0.25 in. OD (6.35 mm) x 0.75 in. (19.0 mm) long 2 4 Handle Steel, pipe 1.25 in. OD (31.75 mm) x 1.00 in. ID (25.4 mm) x 21.00 in. (533.4 mm) long 1 5 Nut Nut, 3/8 Hex 2 6 Bolt Bolt, 3/8 X 1.25 0.38 in. (9.6 mm) OD x 1.25 in. (31.75 mm) long 1 Figure D-29. Spanner Wrench Tool Assembly a. Weld pins (3) in spanner handle (1) and spanner jaw (2) as shown in Figure D-29. Spanner Wrench Tool Assembly. b. Position and clamp handle (4) to spanner handle piece (1) as shown in Figure D-29. Spanner Wrench Tool Assembly. c. Weld handle to spanner handle on both sides of spanner handle. d. Assemble spanner jaw (2) and spanner handle using bolt (6) and 2 hex nuts (5). D-35 D-35