TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1254 of 1591
TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 2-1079 2-1079 2-1079 2-1079 2-1079 THREE WAY CONTROL VALVE ASSEMBLY INPUT FLOW TEST (1) Disconnect hose from elbow on port P of three way (lower) control valve assembly. (2) Connect hydraulic tester between hose and port P with test hoses and adapters. (3) Start engine (TM 9-2320-366-10-1). (4) Position PTO switch to on (TM 9-2320-366-10-1). (5) Increase engine rpm to 1250-1450 rpm (TM 9-2320-366-10-1). (6) Position MHC power switch to ON (TM 9-2320-366-10-1). (7) Observe flow reading of 12-14 gpm (45-53 lpm). If flow is low, main relief valve on three way valve assembly is faulty. (8) Position MHC power switch to OFF (TM 9-2320-366-10-1). (9) Position PTO switch to off (TM 9-2320-366-10-1). (10) Shut down engine (TM 9-2320-366-10-1). (11) Disconnect hydraulic tester, hoses and adapters. (12) Connect hose to port P.