TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1244 of 1591
Hydraulic components are hot when hydraulic oil reaches operating temperature. Use caution when handling hydraulic components. Wear gloves or use rags to hold metal objects. Failure to comply may result in injury to personnel. Prolonged contact with lubricating oil (MIL-L- 2104) may cause a skin rash. Skin and clothing that come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing should be removed immediately. Areas in which lubricating oil is used should be well ventilated to keep fumes to minimum. Failure to comply may result in injury to personnel. Lubricating oil is slippery and can cause falls. Wipe up spilled oil with rags. Failure to comply may result in injury to personnel. TM 9-2320-366-34-1 Dump body weighs approximately 3,030 lbs. (1,376 kgs). Use care while performing valve adjustments and pressure checks. Stay clear of dump body while operating. Failure to comply may result in injury to personnel. WARNING Change 2 2-1072.13 (1) Raise dump body to maintenance position (TM 9-2320-366-10-1). (2) Position drain pan under counterbalance valve. (3) Remove counterbalance valve from four-way relief valve (para 17-3). (4) Clean counterbalance valve of any debris which could cause valve to not function. (5) Inspect preformed packing and back-up rings for damage. (6) If preformed packings or back-up rings are damaged, replace or repair counterbalance valve (para 17-3). (7) Install counterbalance valve in four-way relief valve (para 17-3).