TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1228 of 1591
TM 9-2320-366-34-1 Change 2 2-1070.1 PRESSURE TEST (CONT) Test continued from page 2-1069. NOTE Keep tachometer within 1,250-1,450 RPM when PTO is engaged. Failure to comply may result in damage to equipment. In the event of a tachometer failure, a HAND THROTTLE lever positioned to L is approximately 1,250-1,450 RPM. (15) Set engine speed to 1250-1450 RPM (TM 9-2320-366-10-1). (16) Perform SET/ICE-R Test #51 (TM 9-4910-571-12&P) (17) Position Dump Body UP/DOWN switch to DOWN position (TM9-2320-366-10-1), while assistant checks reading on STE/ICE-R. (18) If pressure is less than 2,850 PSI (19,650 kPa), replace hydraulic rotary pump (para 16-91). In the event of a tachometer failure, a HAND THROTTLE lever positioned to full down position is approximately 750 RPM. (19) Set engine speed to idle 750 RPM (TM 9-2320-366-101). (20) Position PTO switch to off (TM 9-2320-366-10-1). (21) Shut down engine (TM 9-2320-366-10-1). CAUTION NOTE