TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1219 of 1591
TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS 1. START YES Hydraulic oil level OK. PTO OK. Hydraulic hoses, tubes and fittings OK. Is flow and pressure at input to monoblock valve assembly OK? Monoblock Valve Flow Test REASON FOR QUESTION WARNING Read WARNING on following page. j8. M1089 MATERIAL HANDLING CRANE (MHC) HOIST DOES NOT WORK INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10). Personnel Required (2) Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Tester, Hydraulic (Item 73, Appendix B) Pan, Drain (Item 43, Appendix B) Goggles, Industrial (Item 28, Appendix B) Faulty three stage hydraulic pump. Faulty monoblock valve. Faulty input check valve. Faulty main relief valve. Faulty manual override valve. NO Faulty three stage hydraulic pump or input check valve will cause low pressure to eight bank valve assembly. Replace three stage hydraulic pump (para 16-92). Materials/Parts Rag, Wiping (Item 60, Appendix C) Hose (2) (Item 40, Appendix C) Fitting (2) (Item 31, Appendix C) Reducer, Tube (Item 61, Appendix C) Adapter, Swivel (Item 3, Appendix C) Adapter, Pipe (Item 2, Appendix C) Fitting (Item 32, Appendix C) Adapter, Pipe (Item 1, Appendix C) 2-1062 2-1062 2-1062 2-1062 2-1062