TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1217 of 1591
TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 KNOWN INFO POSSIBLE PROBLEMS REASON FOR QUESTION TEST OPTIONS 2. Does boom remain in position under load? NO YES 3. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION NO YES Faulty holding relief valve. Faulty telescopic cylinder. Holding Valve Check Does telescopic cylinder work smoothly without leaking? Faulty telescopic cylinder. Telescopic Cylinder Load Test Faulty telescopic cylinder will cause boom to not telescope in or out. Replace telescopic cylinder (para 16-35). Replace telescopic cylinder (para 16-35). Fault corrected. Hydraulic oil level OK. Hydraulic hoses, tubes, and fittings OK. Control valve OK. Tele-out lockout valve OK. Faulty holding valve will cause telescopic cylinder to drift. Hydraulic oil level OK. Hydraulic hoses, tubes, and fittings OK. Control valve OK. Tele-out lockout valve OK. Holding relief valve OK. j7. M1089 MATERIAL HANDLING CRANE (MHC) BOOM DOES NOT TELESCOPE IN OR OUT (CONT) j7. M1089 MATERIAL HANDLING CRANE (MHC) BOOM DOES NOT TELESCOPE IN OR OUT (CONT) j7. M1089 MATERIAL HANDLING CRANE (MHC) BOOM DOES NOT TELESCOPE IN OR OUT (CONT) j7. M1089 MATERIAL HANDLING CRANE (MHC) BOOM DOES NOT TELESCOPE IN OR OUT (CONT) j7. M1089 MATERIAL HANDLING CRANE (MHC) BOOM DOES NOT TELESCOPE IN OR OUT (CONT) (2-1059 Blank)/2-1060 (2-1059 Blank)/2-1060 (2-1059 Blank)/2-1060