TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1193 of 1591
TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 2-1036 2-1036 2-1036 2-1036 2-1036 KNOWN INFO KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION TEST OPTIONS REASON FOR QUESTION Faulty holding valve will cause cylinder to drift down. YES NO Is holding valve holding left outrigger in stowed position? Is flow through left outrigger control valve OK? NO YES Control Valve Flow Test Faulty control valve will cause jack cylinder not to operate properly. Replace left outrigger jack cylinder (para 16-56). Repair eight bank valve assembly (para 16-59). POSSIBLE PROBLEMS WARNING Read WARNING on following page. Visual inspection START 1. 2. Faulty control valve. Faulty left outrigger jack cylinder. Faulty holding valve. Faulty control valve. Faulty left outrigger jack cylinder. j2. M1089 MATERIAL HANDLING CRANE (MHC) LEFT OR RIGHT OUTRIGGER DRIFTS OR DOES NOT WORK INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Personnel Required (2) Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Tester, Hydraulic (Item 73, Appendix B) Pan, Drain (Item 43, Appendix B) Goggles, Industrial (Item 28, Appendix B) Hydraulic oil level OK. Hydraulic hoses, tubes and fittings OK. Holding valve OK. Hydraulic rotary pump OK. Monoblock valve OK. Hydraulic oil level OK. Hydraulic hoses, tubes, and fittings OK. Materials/Parts Rag, Wiping (Item 60, Appendix C) Hose (2) (Item 40, Appendix C) Fitting (2) (Item 31, Appendix C) Reducer, Tube (Item 61, Appendix C) Adapter, Swivel (Item 3, Appendix C) Adapter, Pipe (Item 2, Appendix C) Fitting (Item 32, Appendix C) Adapter, Pipe (Item 1, Appendix C)