TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1151 of 1591
TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 STINGER CYLINDER PRESSURE TEST (CONT) (Continued from previous page) (15) Position PTO switch to on (TM 9-2320-366-10-1). (16) Position stinger control valve handle to IN, perform pressure test, and note pressure reading. (17) If pressure is not between 2400-2950 psi (16548-20340 kPa), repair or replace lower valve assembly (para 16-84). (18) If pressure is 2400-2950 psi, (16548-20340 kPa) replace stinger cylinder (para 16-70). (19) Position PTO switch to off (TM 9-2320-366-10-1). (20) Shut down engine (TM 9-2320-366-10-1). (21) Disconnect hydraulic tester, fittings, and adapters. (22) Connect stinger IN (LH) hose to test point fitting. (23) Remove drain pan from under vehicle. h4. M1089 STINGER CYLINDER DOES NOT WORK (CONT) h4. M1089 STINGER CYLINDER DOES NOT WORK (CONT) h4. M1089 STINGER CYLINDER DOES NOT WORK (CONT) h4. M1089 STINGER CYLINDER DOES NOT WORK (CONT) h4. M1089 STINGER CYLINDER DOES NOT WORK (CONT) 2-1000 2-1000 2-1000 2-1000 2-1000