TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1136 of 1591
TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 NOTE Both left and right rear axle bogies are inspected in the same manner. (1) Remove six screws and cover from rear axle bogie. (2) Inspect rear axle bogie for damage. (3) Jack up one of the rear axles, place on motor vehicle maintenance trestle, and look for excessive movement in axle bogie. (4) Remove motor vehicle maintenance trestle and lower axle. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well ventilated area. If adhesive, solvent or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in serious injury or death to personnel. (5) Apply thin bead of sealing compound to seating surface of housing. (6) Install cover and six screws on housing with fill plug at the 1 o'clock position. (7) Tighten six screws to 24 lb-ft (32 N·m). 2-985/(2-986 Blank) 2-985/(2-986 Blank) 2-985/(2-986 Blank) 2-985/(2-986 Blank)