TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1133 of 1591
g1. WANDERS, PULLS TO ONE SIDE, OR SHIMMIES INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Materials/Parts Sealing Compound (Item 75, Appendix C) Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Jack, Dolly-Type, Hydraulic (Item 37, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Trestle, Motor Vehicle Maintenance (Item 81, Appendix B) Personnel Required (2) TM 9-2320-366-34-1 2-982 Lugnuts OK. Steering shaft and components OK. Brake adjustment OK. Front and rear shock absorbers and brackets OK. Front and rear leaf springs OK. Spring bushings and shackles OK. Parabola spring assemblies OK. Control vehicular suspension arms OK. Resilient mounts OK. V-rod control arms OK. Stabilizer bar OK. KNOWN INFO POSSIBLE PROBLEMS Faulty rear axle bogies. 1. Are rear axle bogies free from damage? WARNING Read WARNING on following page. START TEST OPTIONS Visual Inspection REASON FOR QUESTION If rear axle bogies are damaged or bearings are worn it can cause vehicle to wander, pull to one side, or shimmy. Repair rear axle bogie (para 10-3). YES NO Fault corrected.