TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1118 of 1591
TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 TM 9-2320-366-34-1 2-967 2-967 2-967 2-967 2-967 WARNING Wear approved eye protection when performing pressure checks. Failure to comply may result in oil getting into eyes. If oil contacts eyes, seek medical attention immediately. Fuel and oil are slippery and can cause falls. Wipe up spilled fuel or oil with rags. Failure to comply may result in injury to personnel. Drop hydraulic pressure to zero before disconnecting any hydraulic hose, tube, or fitting. Failure to comply may result in injury to personnel. (1) Start engine (TM 9-2320-366-10-1). Allow engine to run until reaching normal operating temperature. (2) Engage PTO (TM 9-2320-366-10-1). (3) Increase engine rpm, using hand throttle lever, until 1250-1450 rpm is reached. (4) Check hydraulic pump for overheating with engine at normal operating temperature. (5) Decrease engine rpm to 750 rpm. (6) Disengage PTO (TM 9-2320-366-10-1). (7) Shut down engine (TM 9-2320-366-10-1).