TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download

Page 1108 of 1591

Change 1 2-960.1 TM 9-2320-366-34-1 CAUTION WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. Loose or dirty connectors may cause intermittent loss of power to transmission ECU and diagnostic codes to be logged. Ensure that all connectors are clean and tight before performing troubleshooting. Failure to comply may result in incorrect test results. (1) Remove control valve module (para 7-10). (2) Remove transmission internal wiring harness (para 7-13). (3) Inspect solenoid preformed packings for damage (para 7-7, 7-8, and 7-12). (4) Inspect valves for freedom of movement, or if stuck or sticking (para 7-7, 7-8, and 7-12). (5) If damaged preformed packings and/or stuck or sticking valves are found, repair control valve module (para 7-11). (6) If no damage is found, replace C solenoid (para 7-7) and continue with step 2. (7) Install transmission internal wiring harness (para 7-13). (8) Install control valve module (para 7-10).