TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1107 of 1591
2-960 Change 1 Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) TM 9-2320-366-34-1 1. TEST OPTIONS Visual Inspection REASON FOR QUESTION YES NO Replace C solenoid (para 7-7) and continue with step 2. WARNING CAUTION Read WARNING and CAUTION on following page. START KNOWN INFO POSSIBLE PROBLEMS Transmission oil level OK. Main oil pressure low. C3 oil pressure low. Are control valve solenoid preformed packings damaged, or are valves stuck or sticking? If control valve module solenoid preformed packings are free from damage, and valves are not stuck or sticking, C solenoid is faulty. Faulty C solenoid. Faulty control valve module. Faulty WTEC III TPSS. Repair control valve module (para 7-11). INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Personnel Required (2) c80. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 55 AND ANY SUB CODE