TM-9-2320-366-34-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Download
Page 1083 of 1591
TM 9-2320-366-34-1 2-936 Change 1 1. WARNING CAUTION Read WARNING and CAUTION on following page. START TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION KNOWN INFO Replace transmission external wiring harness (para 6-7). YES POSSIBLE PROBLEMS NO Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. WTEC III transmission ECU OK. Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty C3 solenoid regulator valve. Faulty C3 pressure switch. Is continuity present from connector P119-h to connector P67-W? If continuity is not present, transmission external wiring harness is faulty. INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) STE/ICE-R (Item 70, Appendix B) Multimeter, Digital (Item 41, Appendix B) Goggles, Industrial (Item 28, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Wire, Elect, 50 ft (Item 97, Appendix C) Adapter, Straight, Pipe to Tube (Item 2.1, Appendix C) Adapter, Straight, Tube to Boss (Item 2.2, Appendix C) Hose Assembly, Nonmetallic (Item 40.2, Appendix C) References TM 9-4910-571-12&P Personnel Required (2) c78. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 52 AND ANY SUB CODE (SERIAL NUMBER 6510032369 AND HIGHER)