TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 884 of 1158
TM 9-2320-366-20-5 Section II. MAINTENANCE PROCEDURES 24-2. AIR FILTER RESTRICTION GAUGE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Instrument panel assembly removed for access (para 7-15). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) a. Removal. (1) Disconnect vacuum hose (1) from AIR FILTER RESTRICTION GAUGE (2). (2) Remove two screws (3) and AIR FILTER RESTRICTION GAUGE faceplate (4) from instrument panel assembly (5). (3) Remove AIR FILTER RESTRICTION GAUGE (2) from instrument panel assembly (5). b. Installation. (1) Position AIR FILTER RESTRICTION GAUGE (2) in instrument panel assembly (5). (2) Install AIR FILTER RESTRICTION GAUGE faceplate (4) on instrument panel assembly (5) with two screws (3). (3) Connect vacuum hose (1) to AIR FILTER RESTRICTION GAUGE (2). c. Follow-On Maintenance. (1) Install instrument panel assembly (para 7-15). (2) Start engine (TM 9-2320-366-10-1). (3) Check operation of AIR FILTER RESTRICTION GAUGE. (4) Shut down engine (TM 9-2320-366-10-1). End of Task. 24-2